ALS

Thrust Cylindrical Roller Bearings

811ϵ

<>

S ̖ ߴ ~d OD ԭ̖
Shaft Designation Mass Dimensions Basic Load Ratings Limiting Original
Diameter d T rs   Cr o  Cor Speed Designation
Dynamic Static
mm g min. kN kN rpm
15 81102 24 15 28 9 0.3 14.4 28.5 5500 9102
17 81103 27 17 30 9 0.3 15.9 33.5 5000 9103
20 81104 37 20 35 10 0.3 24.9 53.0 5800 9104
25 81105 53 25 42 11 0.6 33.5 76.0 3100 9105
30 81106 57 30 47 11 0.6 35.5 86.0 2700 9106
35 81107 73 35 52 12 0.6 39.0 101.0 2300 9107
40 81108 105 40 60 13 0.6 56.0 148.0 1900 9108
45 81109 130 45 65 14 0.6 59.0 163.0 1700 9109
50 81110 140 50 70 14 0.6 61.0 177.0 1600 9110
55 81111 218 55 78 16 0.6 90.0 300.0 1100 9111
60 81112 266 60 85 17 1.0 103.0 315.0 1100 9112
65 81113 310 65 90 18 1.0 107.0 340.0 1100 9113
70 81114 332 70 95 18 1.0 111.0 365.0 1000 9114
30.05 817/30.05 ZS/YA 120 30.05 54 13.8 0.6 35.5 8.6 2700 409906K
38.5 817/38.5 ZS 254 38.5 66.7 18 0.6 56.0 148.0 1900 409908
f
1.л~dɡODٺHx񅢿á
2.SеıּƳɣ̖TNSضȣ120Bm150Rr180ڡ
3.֬rODٞДֵ25%
Note:
1.These load, speed and mass is reference of choice only.  
2.If the cages are made of plastics, suffix "TN" is added to the bearing No.,the maximum allowable working themperrature is 120 in continuous working ,150 in temporary working and 180 in short working.
3.With grease lubrication, 25% of these limiting speed will apply.


ͽ2ע