|
推力滾針和保持架組件 Thrust Needle Roller and Cage Assemblies AXK…,AS… 系列 |
 |
| 軸徑 | 型號 | 重量 | 推力墊圈 | 重量 | 尺寸 | 基本額定載荷 | 極限轉速 | 原有型號 | ||||
| Shaft | Designation | Mass | Thrust | Mass | Dimensions | Basic Load Ratings | Limiting | Original | ||||
| Diameter | Washer | Dc1 | Dc | Dw | B1 | 動 Cr | 靜 Cor | Speed | Designation | |||
| d | D | Dynamic | Static | |||||||||
| mm | g | g | min. | kN | kN | rpm | ||||||
| 15 | AXK 1528 | 4 | AS 1528 | 3 | 15 | 28 | 2 | 1 | 11.3 | 36.0 | 3600 | 889102 |
| 17 | AXK 1730 | 4 | AS 1730 | 4 | 17 | 30 | 2 | 1 | 11.9 | 39.5 | 3200 | 889103 |
| 20 | AXK 2035 | 5 | AS 2035 | 5 | 20 | 35 | 2 | 1 | 13.1 | 46.5 | 3100 | 889104 |
| 25 | AXK 2542 | 7 | AS 2542 | 7 | 25 | 42 | 2 | 1 | 14.7 | 58.0 | 2800 | 889105 |
| 30 | AXK 3047 | 8 | AS 3047 | 8 | 30 | 47 | 2 | 1 | 16.3 | 70.0 | 2300 | 889106 |
| 35 | AXK 3552 | 10 | AS 3552 | 9 | 35 | 52 | 2 | 1 | 17.8 | 81.0 | 2000 | 889107 |
| 40 | AXK 4060 | 16 | AS 4060 | 12 | 40 | 60 | 3 | 1 | 28.0 | 114.0 | 1700 | 889108 |
| 45 | AXK 4565 | 18 | AS 4565 | 13 | 45 | 65 | 3 | 1 | 30.0 | 128.0 | 1500 | 889109 |
| 50 | AXK 5070 | 20 | AS 5070 | 14 | 50 | 70 | 3 | 1 | 32.0 | 143.0 | 1400 | 889110 |
| 55 | AXK 5578 | 28 | AS 5578 | 18 | 55 | 78 | 3 | 1 | 38.0 | 186.0 | 1200 | 889111 |
| 60 | AXK 6085 | 33 | AS 6085 | 22 | 60 | 85 | 3 | 1 | 44.5 | 234.0 | 1100 | 889112 |
| 65 | AXK 6590 | 35 | AS 6590 | 24 | 65 | 90 | 3 | 1 | 46.5 | 255.0 | 1000 | 889113 |
| 70 | AXK 7095 | 60 | AS 7095 | 25 | 70 | 95 | 4 | 1 | 54.0 | 255.0 | 1000 | 889114 |
| 75 | AXK 75100 | 61 | AS 75100 | 27 | 75 | 100 | 4 | 1 | 55.0 | 265.0 | 950 | 889115 |
| 說明： | ||||||||||||
| 1.表中所列基本額定載荷、極限轉速和重量，僅供選擇參考用。 | ||||||||||||
| 2.軸承的保持架如由塑料制成，在型號后加TN，允許工作溫度：120℃連續，150℃臨時，180℃短期。 | ||||||||||||
| 3.脂潤滑時，極限轉速為表列數值的25%。 | ||||||||||||
| Note: | ||||||||||||
| 1.These load, speed and mass is reference of choice only. | ||||||||||||
| 2.If the cages are made of plastics, suffix "TN" is added to the bearing No.,the maximum allowable working | ||||||||||||
| themperrature is 120℃ in continuous working ,150℃ in temporary working and 180℃ in short working. | ||||||||||||
| 3.With grease lubrication, 25% of these limiting speed will apply. | ||||||||||||